14
IM 04L51B11-01EN
(5) Installing the Devices
Install the GX20W and YTMX580 to configure the network
shown in figure 1.
First, to establish wireless communication between the
GX20W’s built-in GW and YTMX580, install them within
the wireless communication range.
(6) Creating a project
Create a project describing the network configuration.
To create a project, use the Field Wireless Configurator.
The procedure is given in steps
to
.
Starting the Field Wireless Configurator
When you start the Field Wireless Configurator, you will
be prompted to enter the password. Set User Name to
admin and Password to !admin.
Creating a new project
On the File menu, click New Project.
Network ID:100 is added to the Networks tree. Select it,
and check that the settings on the Network Information
tab are as shown in figure 15 (see the built-in GW
settings in table 3). You do not need to change the
settings from their default values.
Figure 15
Adding the wireless device (YTMX580)
Click the Devices tab and then the yellow file open
icon. Open the provisioning information file (YTMX-
TEST01.ypif) that you created in step (3) (figure 16).
The provisioning file is in C:\FM\Export\PD.
Figure 16
A dialog box shown in figure 17 appears. Click OK to
add the wireless device to the list on the Devices tab as
shown in figure 18.
Figure 17
Figure 18
