YOKOGAWA SL1400 ScopeCorder LITE, Operation Manual

Page: 5 / 41

IM 701240-02E
Front Panel Parts and Functions
SNAPSHOT CLEAR TRACE
FILE ZOOM CURSOR
HISTORY FEED MEASURE
IMAGE
SAVE
PRINT PROTECT
FEED key Section 3.5
Press the key to feed the paper in
the built-in printer.
PROTECT key Section 16.5
Press the key to illuminate the indicator above the key. Key
operations are disabled. Press the key again clears the
condition.
IMAGE SAVE key Section 13.12
Saves the screen image data to a storage medium. Settings
such as the save destination medium, output format, and
comment are specified in the IMAGE menu that appears when
you press the MENU key.
PRINT key Sections 12.1 to 12.3
Prints the screen image. Settings such as the print
destination, output format, and comment are specified
in the PRINT menu that appears when you press the
MENU key.
SNAPSHOT key Sections 8.7 and 13.10
Leaves the current displayed waveform on the screen in black
and white. This waveform can be saved and loaded.
CLEAR TRACE key Section 8.7
Clears the displayed waveforms such as snapshot and
accumulated waveforms.
HISTORY key Sections 11.1 to 11.3
Displays a menu used to display and search
waveforms using the history memory
function. Sequentially stored waveforms can
also be displayed and searched.
MEASURE key Sections 11.5 and 11.6
Displays a menu used to perform automated
measurement of waveform parameters and
statistical processing.
CURSOR key Section 11.4
Displays a menu used to perform cursor
measurements.
ZOOM key Section 8.5
Displays a menu used to zoom the waveform. When the zoom
screen is displayed, the indicator above the key illuminates.
FILE key Sections 13.2 to 13.6, 13.8 to 13.11, 13.13, 13.15 to 13.18
Displays a menu used to save or load various data from the storage medium.
In addition, you can display the thumbnails of the stored screen image data.
LCD
Jog shuttle
For a description, see the
previous page.
Soft keys
Used to select items on the
soft key menu that appears
when setting up the SL1400.
Keys and knobs
For a description, see the
previous page.
ESC key
For a description, see
the previous page.
Keys
For a description,
see the figure above.
Functional ground terminal
Connect the ground cable when compensating
the phase of the probe.
Probe compensation signal output terminal
Section 3.8
Outputs a 1-kHz, 1-V square-wave signal.
MENU
DISPLAY
MODE
RECORD
FILE ZOOM CURSOR MEASURE HISTORY
START/
STOP
CHART
SPEED
CH ALL CH
RANGE
FINE
POSITION
FINE
RANGE POSITION
TRID'D
MANUAL TRIG
RESET SELECT
IMAGE
SAVE
PRINT FEED PROTECT