IM 12D7B4-E-H
1
1. INTRODUCTION AND GENERAL DESCRIPTION
The Yokogawa EXAxt SC150 is a 4-wire panel mounted converter designed for industrial
process monitoring, measurement and control applications. This instruction manual contains
the information needed to install, set up, operate and maintain the unit correctly. This
manual also includes a basic troubleshooting guide to answer typical user questions.
Yokogawa can not be responsible for the performance of the EXAxt analyzer if these
instructions are not followed.
1-1. Instrument check
Upon delivery, unpack the instrument carefully and inspect it to ensure that it was not
damaged during shipment. If damage is found, retain the original packing materials
(including the outer box) and then immediately notify the carrier and the relevant Yokogawa
sales office.
Make sure the model number on the textplate affixed to the side of the instrument agrees
with your order. Examples of the text plate is shown below.
Figure 1-1. Textplate
NOTE:
The textplate will also contain the serial number and any relevant certification marks.
Be sure to apply correct power to the unit, as detailed on the Textplate.
Summary of Contents for SC150
