manualshive.com logo in svg

YOKOGAWA PH71, User Manual

Share
Download
YOKOGAWA PH71 User Manual Download Page 36

IM 12B03D01-01E

5-1

5.  Keypad and Display Functions

5.  Keypad and Display Functions

There are eight membrane keys on the keypad of the Model PH71 Personal pH Meter.
The following key functions are provided.

• Displaying a pH value and temperature

• Displaying a pH value, date and time

• Holding a pH value and temperature

• Storing data — pH value and associated information

• Function mode

• Calibration

POWER

Auto Power Off

HOLD

F/ENT

MEAS

DATA

F050001.EPS

CAL

Turns power on or off. 
Automatic Power Off 
function (default: 20 min).

Moves to calibration 
mode.

Moves to measurement 
mode or switches 
measurement display 
panels. Also exits from the 

current function and returns 
to measurement mode.

Changes setting or 
value.

Moves to function 
mode or confirms data 
entry.

Holds the currently 
measured value.

Stores the currently 
measured value in 
memory.

Summary of Contents for PH71





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands