manualshive.com logo in svg

YOKOGAWA PH71, User Manual

Share
Download
YOKOGAWA PH71 User Manual Download Page 27

IM 12B03D01-01E

3-4

3.  Measurement

(2) Data storage

If the 

DATA

 key is pressed during measurement, 

 mark starts flashing. Press the

F/ENT

 key, then currently measured data can be stored in nonvolatile memory. Data

stored are measured conductivity, measured temperature, date and time. Up to 300 data
including individually deleted data can be stored. If you attempt to store more data,

 will be displayed.

If 

 is displayed before the data number has reached 300, run defrag referring to

Section 5.3 (14), “Defrag memory (DFLG) panel.” This will free up memory occupied
by deleted data, allowing data to be stored newly. To check stored data, refer to Section
5.3 (1), “Display stored data (dAt) panel.”

Pressing 

DATA

 or 

MEAS

 key while 

 mark is flashing cancels data storage and

returns the meter to measurement mode.

F030402.EPS

Abort data storage.

Execute data storage.

Press              key to store data while           is flashing.

While            is flashing, press

or             keys to abort data storage.

F/ENT

MEAS

DATA

DATA

Summary of Contents for PH71





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands