3-6
IM XL100C-E
Setting the RS-485 Interface
• Selecting the Slave Address (set when using the Modbus protocol)
Select the address from the following values.
1 to 247
Use the ID number of the Hardware setup display when using the dedicated protocol.
1 to 99
• Selecting the Baud Rate
Select the baud rate from the following:
2400, 4800, 9600, 19200, 38400, 57600, or 115200
• Setting the Data Length
Select the data length from below. To output data in binary format, be sure to set the
data length to 8 bits.
7 or 8
• Selecting the Parity Check
Select the parity check from the following:
ODD, EVEN, or NONE
Procedure
1.
Press
SETTING
to enter Setting Mode.
2.
Use the
arrow keys
to select COMMUNICATION, and press
SELECT
.
→
3.
Use the
arrow keys
to select SERIAL COMM., and press
SELECT
.
→
3.2 RS-485 Interface Specifications and Setup Procedure
