Tech
Note:
TNA1403
Date:
February
5,
2014
3.)
Next, selected the diamond next to
Measurement Setup
4.)
Depending on what your analyzer is set up to measure, the Measurement
screen will look differently. If your anlyzer is set up to measure pH only,
continue to Setp #5. If your analyzer is set up to measure pH + ORP,
Proceed to Step #5a.
5.)
Select the diamond next to Calibration
Settings, and Proceed to Step #7.
a.
pH + ORP, Select the diamond next
to Calibration Settings, Proceed to
Step #6