Setup Screen details
(Enter the SETUP screens by Quick pressing the POWER key)
Inside the SETUP menu...
(Move through the SETUP screens using the ARROW keys - Quick Press!)
- Set the LCD Contrast
- Set the Debounce for the
Speed sensor.
- HOLD Mode. Extern LOW for
Lift switch. Use STITCH LO
when using the rate Reducer.
- The distance travelled for ever
Speed sensor pulse.
- Working width of the drill.
Quick Press the
POWER key to enter
the SETUP mode.
NOTE: When exiting SETUP turn the
monitor OFF then ON. If not done
"CYCLE POWER" will flash and the
motors will not run.
- Set Date used by REPORTS
- Support Phone number.
- Unit ID for REPORTS
- Set Time used by REPORTS
- PWM POLLING is the power
update rate for Motors. Setting
'04' is recommended
17
Fert
release
distance
from
S
Y
N
C
pulse
Paint
solenoid
on
time.
A
ctivates
when
S
Y
N
C
pulse
occurs
Distance
travell
between
each
S
Y
N
C
pulse
