<3. Component Names>
3-1
IM 01C25C01-01E
3. Component Names
HIGH
LOW
BO H
L
WR E
D
H
L
H
L
F0301.ai
H
L
E
D
H
L
E
D
YES
(Write disabled)
NO
(Write enabled)
Slide switch
(Note 2)
Integral
indicator
(Note 1)
Mounting screw
Amplifier Cover
Cover flange
Process connector
(Note 1)
Process connection
(low pressure side)
Zero-adjustment screw
Conduit connection
External indicator
conduit connection
(Note 1)
CPU assembly
Push button
(Note 1)
(See Subsection 7.6)
Burnout direction switch
Write protection switch
Burnout direction switch (BO)
Hardware write protection switch (WR)
Burnout Direction
Switch Position
Burnout Direction
Write Protection
Switch Position
Write Protection
Transmitter section
Bolt
(Note 2)
(Note 2)
Note 1: See General Specifications sheet of each product for details.
Note 2: Applicable for BRAIN/HART communication type. Set the switches as shown in the figure above to set the burn-out direction
and write protection. The Burnout switch is set to the H side for delivery (unless option code /C1 or /C2 is specified in the order),
and the hardware write protection switch is set to E side. The setting of the switches can be confirmed via communication. An
external zero adjustment screw can only be disabled by communication. To disable the screw, set a parameter before activating
the hardware write protect function. See each communication manual for details.
Figure 3.1
Component Names
Table 3.1
Display Symbol
Display Symbol
Meaning of Display Symbol
The output signal being zero-adjusted is increasing.
Besides, this symbol lights when local parameter setting is in progress.
The output signal being zero-adjusted is decreasing.
Besides, this symbol lights when local parameter setting is in progress.
F0302.ai
Write protect function is enabled.