5-17
IM CW500-01EN
Editing the Allowable Range
Set the EMC allowable range (percentage content) for harmonics for
each order. The specified ranges are displayed as a bar graph on the
harmonics graph.
Settings
Specified value
*
/customize (voltage/current)
* Default value
<Procedure>
Use the up and down arrow keys to move to Edit allowable range.
→
Press ENTER to display the allowable range entry window.
→
Use
the arrow keys to select the harmonic order you want to set.
→
Press
ENTER to open a value entry window.
*
→
Use the arrow keys to enter
the allowable values.
→
Press ENTER to confirm or ESC to cancel.
* The input range is shown in a pop-up.
When the allowable range entry window is displayed, the following
operations become valid. The default allowable values of each harmonic
order are the values of the international EMC standard IEC61000-4-
7: industrial environment Class 3. If you change the values and want to
reset to their defaults, press F3 (default). Press F2 (A/V [%]) to switch
between the allowable value entry window of harmonic current and that of
harmonic voltage. To return to the measurement setup screen, press F1
(return).
5.3 Measurement Setup
