background image

6

IM CA310-02EN

Optional Accessories (Sold separately)

The following optional accessories are available for purchase separately. For information about ordering accessories, contact your 
nearest YOKOGAWA dealer.

Item

Model or 

Component Number

Applicable To

Notes

CA310

CA320

CA330

Rubber boots

1

93060

P

P

P

For protecting the main unit

AC adapter

94012

P

P

P

Input:100 VAC

Operating temperature range: -10°C to 40°C

94013

P

P

P

Input:120 VAC

Operating temperature range: -10°C to 40°C

94016

P

P

P

Input: 220 VAC

Operating temperature range: -10°C to 40°C

RJ sensor

90080

P

PT100 JIS AA class or equivalent

Thermometer operating temperature range: 

-10°C to 55°C

8-polar miniDin connector

Shielded cable 1.5 m

Y terminal (compatible with M3  terminal blocks)

TC mini plug set

90040

P

10 types

K/T/J/E/R(S)/G/C/D/N/B(U)

90045

P

4 types

K/T/J/E

Grabber clip

98025

P

P

2

P

2

Red-black pair, separate type (2 m)

Strap

97040

P

P

P

For rubber boots

Accessory case

B9108XA

P

P

P

Optional accesories(sold separately) are not covered by warranty of this instrument.

1  When rubber boots are attached, the CA310/CA320/CA330 cannot be stored in the portable case.
2  Cannot be used simultaneously with the included binding post (99045/99046).

Summary of Contents for CA310





















































Reviews: