24
IM AQ6376-02EN
Ambient Temperature and Humidity
Ambient temperature: 5 to 35°C
Humidity: 20 to 80% RH or lower (no condensation)
Note
Condensation may occur if the instrument is moved to another place where the ambient
temperature is higher, or if the temperature changes rapidly. In this case, let the instrument
adjust to the ambient temperature for at least one hour before use.
When the instrument is packaged in a box and moved, prevent condensation by allowing
sufficient time for the instrument to acclimatize before removing it from the box.
Flat, Even Surface
Install the instrument with the correct orientation on a stable, horizontal surface. If the
instrument is installed in a horizontal position, rubber stoppers can be attached to the
feet at the rear of the instrument to prevent the instrument from sliding. One set of rubber
stoppers (two stoppers) are included with the instrument.
Rubber stoppers
A9088ZM
Feet at the rear of the instrument
Rack Mounting
To rack-mount the instrument, use the separately sold rack mount kit.
Product Name
Model
Rack Mounting Kit for EIA Single
751535-E5
Rack Mounting Kit for JIS Single
751535-E5
An outline of the mounting procedure is given below. For detailed instructions, see the
manual that is included with the rack mount kit.
1.
Remove the handles from both sides of the instrument.
2.
Remove the four feet from the bottom of the instrument.
3.
Remove the four seals the rack mount attachment holes on each side of the
instrument near the front.
4.
Place seals over the feet and handle attachment holes.
5.
Attach the rack mount kit to the instrument.
6.
Mount the instrument on a rack.
5 Installing the Instrument
