manualshive.com logo in svg

YOKOGAWA AQ6374, Getting Started Manual

Share
Download
YOKOGAWA AQ6374 Getting Started Manual Download Page 35

33

IM AQ6374-02EN

2.

  Turn ON the 

MAIN POWER 

switch on the rear panel of the instrument. The 

POWER

 switch on the front panel of the instrument lights orange. 

 

 

   

3.

  Wait a few seconds after step 2, and then press the 

POWER

 switch on the front 

panel. The color of the switch turns from orange to green. 

The operating system starts up, and initialization of the instrument begins. The instrument 
will not start for a few seconds immediately after step 2 even if you press the POWER 
switch.

 

 

   

USB 

POWER

 

  The initialization screen appears, and the internal initialization process starts. STEP 

1/9 through STEP 9/9 are displayed in the lower right part of the screen to indicate 
the progress of initialization. 

Operations Performed When the Power Is Turned On

 CAUTION

Do not press the POWER or MAIN POWER switches while initialization is in 
progress.
Doing so can cause malfunction. 

French

 

 ATTENTION

N’appuyez pas sur les interrupteurs POWER ou MAIN POWER pendant 
l’initialisation.
Cela pourrait provoquer des dysfonctionnements.

8  Turning the Power ON/OFF

Summary of Contents for AQ6374














































Reviews:

No comments

Brands by name

Popular brands

Load more brands