manualshive.com logo in svg

YOKOGAWA AQ4305, Instruction Manual, Page: 38 / 50

Share
Download
YOKOGAWA AQ4305 Instruction Manual Download Page 38

5.1

 

operating procedures 

Chapter 5 Operating Procedures 

5-2 

5.1

 

operating procedures   

Turning [POWER] on, then [POWER] LED puts on, [OUT], [LAMP] switches LED put on, and FAN 
operating. 
 
 
 
 
 
 
 
 
 
 
 

           

  Optical output control 
  [OUT] switch control on/off the shutter. The shutter open and [OUT] LED put on ,turning    [POWER] on. 
Then push [OUT] switch, the shutter close and [OUT] LED put out. 
 
 [LAMP] switch control on/off the lamp currents. The lamp lighting and [LAMP] LED put on ,turning  
[POWER] on. Then push [LAMP] switch, the light out and [LAMP] LED put out. 
 
   
   
   
   
   
   

 

 

If any abnormal situation occurs in the hardware during initialization processing, LED in 

switches are not lighting.   

If the fan does not work, lamp continue on and off. In this case, turn [POWER] off. 

If these situations occur, the unit must be repaired. Contact our Service Dept., Sales 
Dept., or nearest office immediately. 
(

☛

 

Contact information is described at the end of the document.) 

Caution 

Summary of Contents for AQ4305



















































Reviews:

No comments