YOKOGAWA ADMAG AXG Series, User Manual

Page: 1 / 16

User’s
Manual
Contents
1. Introduction
1.1 For Safe Use of Product ................................................1
1.2 Warranty .........................................................................3
1.3 Combination for Remote Sensor and
Remote Transmitter .......................................................3
2. Receiving and Storage
2.1 Model and Specifi cations Check .............................................4
2.2 Storage Precautions ......................................................4
3. Installation
4. Wiring
4.1 Wiring Precautions .........................................................6
4.2 Cables ............................................................................6
4.2.5 Recommended Cable for EtherNet/IP
communication .................................................6
4.3 Cable Entries .................................................................6
4.4 Connecting to External Products of Integral
Flowmeter and Remote Transmitter ..............................6
4.4.1 Wiring Precautions for Power Supply Cables ..6
4.4.2 DC Power Connection ......................................7
4.4.3 Grounding .........................................................7
4.4.4 Connecting to External Products ......................7
4.4.5 Wiring Procedures ...........................................7
5. Basic Operating Procedures
5.1 Operation by Display unit ...............................................9
5.2 Display and Basic Confi guration ....................................9
5.3 Display Mode and Setting Mode ....................................9
5.4 Parameter Setting from Display Panel ....................... 10
5.5 microSD Card Setting ................................................. 10
5.6 BRAIN Confi guration Tool ........................................... 10
5.7 HART Confi guration Tool ............................................ 10
5.8 Modbus Confi guration Tool ......................................... 10
5.9 F
OUNDATION
fi eldbus Confi guration Tool ......................11
5.10 EtherNet/IP Confi guration Tool ....................................11
6. Operation
6.1 Pre-operation Zero Adjustment ................................... 12
6.2 Zero Adjustment from Display Unit ............................. 12
6.3 Hardware Switch Setting ............................................ 12
6.3.1 Integral Type and AXG4A Remote
Transmitter ..................................................... 12
6.3.2 AXG1A Remote Transmitter .......................... 13
6.3.3 AXFA11 Remote Transmitter ......................... 13
7. Errors and Countermeasures (Display unit)
ADMAG TI Series
AXG Magnetic Flowmeter
EtherNet/IP Communication Type
Installation Manual
Difference to IM 01E22A01-01EN
IM 01E21A01-03EN-A
IM 01E21A01-03EN-A
1st Edition
Integral Flowmeter
This manual outlines the basic guidelines for installation
and wiring procedures. This manual is applicable only for
EtherNet/IP communication type. For the items which are
not covered in this manual, read the user’s manuals and the
general specifi cations as listed in Table 1.1.
Remote Transmitter
Please read the following descriptions in conjunction with IM 01E22A01-01EN.
This document only applies to AXG produced at Yokogawa Corporation of America and sold to North/Central America.