background image

1

IM701941-01E

Thank you for purchasing the 701941/701942 miniature passive probe.

This 701941/701942 miniature passive probe is designed for user’s safety and 

excellent easy-to-use operability. The probe tip utilizes a spring mechanism to 

minimize the stress applied to a device to be inspected. Additionally, this spring 

mechanism is also effective to prevent the probe tip from slipping on the board 

surface. In particular, the spring mechanism is useful when using the probe 

with it inclined. The probe tip is changeable. Replacement tips are provided 

in the accessory pack. For details about how to change the probe tip, see 

“Maintenance.” A wide variety of optional accessories is available upon request.

To ensure correct use, please read this manual thoroughly before beginning 

operation. After reading this manual, keep it in a convenient location for quick 

reference in the event a question arises during operation.

List of Manuals

The following manuals are provided for the 701941/701942 miniature passive 

probe.

Manual Title

Manual No.

Notes

Model 701941/701942

Miniature Passive Probe

User’s Manual

IM 701941-01E

This manual.

701941/701942 Miniature Passive Probe

IM 701941-92

Document for China.

The “E” in the manual numbers are the language codes.

Contact information of Yokogawa offices worldwide is provided on the following 

sheet.

Document No.

Description

PIM113-01Z2

List of worldwide contacts

Notes

•  The contents of this manual are subject to change without prior notice as 

a result of continuing improvements to the instrument’s performance and 

functions. The figures given in this manual may differ from those that actually 

appear on your screen.

•  Every effort has been made in the preparation of this manual to ensure the 

accuracy of its contents. However, should you have any questions or find 

any errors, please contact your nearest YOKOGAWA dealer.

•  Copying or reproducing all or any part of the contents of this manual without 

the permission of YOKOGAWA is strictly prohibited.

Trademarks

•  Adobe and Acrobat are either registered trademarks or trademarks of Adobe 

Systems Incorporated.

•  In this manual, the ® and TM symbols do not accompany their respective 

registered trademark or trademark names.

•  Other company and product names are trademarks or registered trademarks 

of their respective holders.

8th Edition: October 2017 (YMI)

All Rights Reserved, Copyright © 2004 Yokogawa Electric Corporation

All Rights Reserved, Copyright © 2011 Yokogawa Test & Measurement Corporation

Summary of Contents for 701941















Reviews: