Before adding water, you must first remove the protective cover on the water pump.
Make sure to disconnect the power before adding water.
1. Place the machine on a level surface. First, remove the protective cover on the water
pump by lifting the machine head. Then, add water to the water tank. There are two
ways to add water, as shown in the figures below (Fig. 1 and Fig. 2). Fill the water tank
up to the "MAX" mark indicated.
2. Place the machine's base stably on the water tank, and after covering the small cap of
the water inlet, plug the power cord of the machine into the socket. Before turning on
the power, make sure that the voltage of the machine matches the voltage of the power
source being used.
3. When the water level in the machine's water tank is too low, the machine will
automatically stop the atomization function and stop working. At the same time, a
corresponding water shortage prompt will appear. If you need to add water to the water
tank, please unplug the power cord first.
Fig. 1 :
You can directly add water to
the machine at the top grid.
Fig. 1 :
Lift the machine head and add
water to the water tank.
How to Use
07
Summary of Contents for KC-MH-2301W
Page 22: ......