ENGLISH
21
CONTROL PANEL
INSTALLING FEET
Before mounting the device, remove all of the protective foils.
TIP:
If you want to wall-
mount the device, do not install feet and move on to the “WALL MOUNTING”
section.
Necessary tools (not supplied):
•
Screwdriver.
1. Put the unit on a table covered with a soft cloth or towel in such a way as to have its bottom part
stick out a bit over the edge. Alternatively, while holding it up, put the unit vertically, upside down.
2. Insert screws into the holes located on the feet and gently slide the plastic cover into the screws.
3. Attach the plastic covers to the designated spots on the bottom frame of the heater, then tighten
the screws until you feel resistance.
4. Carefully set the heater on the installed feet and ensure it is stable. If the heater feels loose,
tighten the screws further.
1. Wi-Fi function
2. Temperature and time increment button /
Open window detection function
3. Temperature and time decrement button /
Silent mode
4. Timer / Setting temperature compensation
5. ON/OFF button / Child lock
