ENGLISH
21
6. Place a cup under the portafilter nozzles.
7.
Make sure the water level in the reservoir is at least at the “MIN” level. Plug it in, turn it on
and wait for it to heat up.
8. Press the button and allow the appliance to operate using only water until it stops automatically.
CLEANING THE WATER RESERVOIR
IMPORTANT:
It is recommended to empty the reservoir after each use of the espresso machine.
1. Empty the reservoir of any remaining water by taking it out of the appliance and pouring the liquid
out over a sink.
2. Wash the reservoir with water and dish soap.
3. Rinse the reservoir thoroughly and dry it off.
CLEANING THE APPLIANCE BODY
1. Clean the body of the appliance with a damp cloth. Do not use abrasive cleaning materials,
as they may damage the body.
2. Do not store the portafilter in its mount on the espresso machine, as it has a negative impact
on the gasket between the two parts.
DESCALING
IMPORTANT:
To ensure that the espresso machine functions properly, its internal tubes are clean
and it prepares coffee of the highest quality, it needs to be descaled once a month. Additionally,
the descaling procedure also needs to be carried out if the indicator to the right from the ON/OFF button
is lit up yellow.
1. Fill the water and milk reservoirs with previously prepared solution of water and descaler
to the “MAX” level (the water to descaler ratio should be 4:1, details regarding solution preparation
should be on the descaler bottle). Alternatively, you may also use citric acid (solution of water
to critic acid in the 100:3 ratio).
2. Pick one of the filters and place it in the portafilter (without coffee). Install the portafilter
in its mount.
3. Place a large receptacle under the portafilter nozzles and direct the frother nozzle
to the receptacle.
4. Plug the device in and turn it on using the ON/OFF button. Wait for the espresso machine to heat
up.
5. Press and hold the button for a few seconds. The first stage of the descaling procedure will
begin.
6. After the first stage has completed (the device will stop operation and the button will be lit up).
Empty the receptacle and add fresh descaler solution to the “MAX” level on the reservoir.
7. Place the large receptacle back under the portafilter nozzle and direct the frother nozzle
in the receptacle. Press the button to begin the second stage of the descaling procedure.
8. After descaling, the device will play a sound signal. At that point, empty the water and milk
reservoirs and thoroughly rinse them with clean water.
9.
Fill the water and milk reservoirs with clean water to the “MAX” level. Place the large receptacle
under the portafilter nozzles and direct the frother nozzle to the receptacle.
10. Press the button to begin rinsing the frother.
11. After rinsing the frother, press the button to rinse the coffee segment.
12. Repeat steps 10 and 11 at least 3 times. If necessary, add water to the reservoirs.