ENGLISH
17
FIRST USE
1. Take the espresso machine out of its packaging and remove all protective bags.
2.
Fill the water and milk reservoirs with water to the “MAX” level.
3. Pick a filter and place it in the portafilter (without any coffee), install the portafilter in its mount
and make sure it is installed properly. The portafilter handle should be facing the exact middle
of the device.
4. Place a large receptacle underneath the portafilter nozzles and direct the frother nozzle
to the receptacle.
5. Plug the device in.
6. Turn the device on with the ON/OFF button. The icons will begin blinking white, and the water
reservoir empty indicator will be blinking red.
7. Press any button (aside from the ON/OFF button). The bleeding procedure will commence. After
it has finished, the red indicator will no longer be blinking. The icons will continue blinking until
the espresso machine has heated up.
8. After the process has finished, all indicators will be lit up solid. Press the button to begin
the cleaning process.
9. When the process has finished all indicators will be lit up solid. Pour the water out of the receptacle
while exercising caution (the water will be hot). The appliance is now ready to be used.
USING THE DEVICE
FILLING THE WATER RESERVOIR
1. Lift up the reservoir cover and fill it with water using a jug, or remove the reservoir and fill it with
running water. The amount of water must be between the “MIN” and “MAX” levels on the reservoir.
Never use warm or hot water to fill the reservoir.
2. Make sure that the reservoir has been properly installed in the espresso machine. Direct
the reservoir handle downwards and close the lid.
FILLING THE MILK RESERVOIR
1. Press and hold the frother removal button.
2. Slide the frother out by pulling it to the right.
3. Press and hold the milk reservoir removal button. Slide the reservoir out.
4. Fill the reservoir with
cold milk. Its amount must be between the “MIN” and “MAX” levels
on the reservoir.
5. Install the frother cover back onto the reservoir by pushing it in until you hear it click into place.
6. Install the reservoir back in the espresso machine by sliding it into its mount until you hear it click
into place.
IMPORTANT:
You may use any type of milk you like, for example: whole, skimmed, organic or soy.
Remember, though, that only using milk with high fat content will allow for making rich foam.