ENGLISH
２５
INSERTING THE FILTER
1. To insert the selected filter in the porta-filter, make sure to align the notch on the filter with the groove
inside the porta-filter.
2. Turn the filter to the left or right to lock in place. This will help secure the filter in the porta-filter.
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm water as
following:
1. Pull out the water tank of the coffee maker. Pour cold, clean water into water tank, the water level
should not ex
ceed the “MAX” mark in the tank, then insert it into the coffee maker.
Note:
The appliance is supplied with a removable tank for easy cleaning, you can fill the tank with
water firstly, and then insert the tank into the appliance.
2. Set the proper container under the steam wand.
Note
: As the appliance is not equipped with any cup or jug, prepare your own cup.
3. Make sure that the steam knob is in
“O” position.
4. Plug in the device, and then press
to turn it on.
5. The device will start preheating. Wait until the heating indicator turns blue. The preheating is finished
then.
6. Insert the steam wand into the jug with about 100 milliliters of water about two centimeters, then turn
the steam knob slowly in anticlockwise to
position, water will come out from the steam wand.
Then keep the knob at
“O” position. You can empty the container.
Note:
There may be noise when pumping the water for the first time, it is normal, as the appliance is
releasing the air in the appliance. After about 20s, the noise will disappear.
Note
: Never touch steam outlet during steam jetting and be careful not to burnt.
