![background image](http://html2.mh-extra.com/html/yoder-smokers/ys-640/ys-640_operation-instructions-manual_3415392033.webp)
32
Yoder YS 640
If the gap is greater than 3/16”, the steps below should be followed.
1. Start by removing the burn grate from the firebox and placing it on its top.
2. Next, step on the burn grate and apply enough pressure to bend it back to its origi-
nal shape. DO NOT apply too much pressure or you will overcorrect the burn grate
and it will not fit back into the firebox.
3. Place the burn grate back into the firebox and check the gap between the back
wall and the burn grate to ensure a proper fit. If a gap still exists, then repeat steps
1 and 2.
FIG 29
BURN GRATE
FIREBOX
FIG 30