![background image](http://html1.mh-extra.com/html/yoda/vg211r/vg211r_user-manual_3422989015.webp)
VG211R User Manual
4.2.6. Peer Gateway
You can define any peer gateway in this table. First you may list any peer gateway by IP and net mask,
then you can set call out limitation for that peer gateway, for example Local only, or Long distance or
International call.
But 0.0.0.0 means no more peer gateway limitation. Any VoIP call can be accept by this gateway.
4.2.7. User Management
If you enable VoIP authentication, any incoming call will invoke IVR to guide you input user id and
password. Where can I set user id and password? The answer is User management. You can set user id
and password here. But that is number digit only.
4.3. WAN Settings
The VG211R supports 4 types of WAN connection – Dynamic IP (DHCP Client), PPPoE, Static IP and
PPTP.
4.3.1. Dynamic IP
Under this mode, VG211R enables DHCP client to get IP address automatically from your service
provider. The Host Name is optional, but may be required by some Service Provider’s. The default
MAC address is set to the WAN’s physical interface on the VG211R. If required by Service Provider,
you use the <Clone MAC Address> button to copy the MAC address of the Network Interface Card
installed in your PC and replace the WAN MAC address with this MAC address. If necessary, you can
use the <Restore> buttons to restore the WAN IP address.
12