VG211R User Manual
1.1.2. VG211R – Rear Panel
6
5
4
3
2
1
Item
Connector
Function
1 Phone
Connect to Phone set
。
(or Connect to PBX
CO Line)
2 Line
Connect to PSTN Line
。
3 Local
(1-3)
3 port (10/100Mbps) RJ-45 connector,
connect to PC or local switch/hub.
4 WAN
Connect to Cable or ADSL Modem
。
5 12V
DC
Power connector.
6
RESET
(Reboot)
Reset button. Press for one
second
to reset the
device or press for 5 seconds to reset to the
factory default.
1. Connecting Phone set: Connect phone set directly to the VG211R on phone
2. Connecting PSTN Line: Connect PSTN line directly to the VG211Ruter on Line
3. Connecting Computers: Connect computers directly to the VG211R on ports 1-3 of the LAN ports. If
you have more than 3 computers to plug in, connect a hub or a switch (using its uplink port) and connect
additional computers to that device
.
4. Connecting a Cable Modem or DSL Modem: Connect your Cable or DSL modem to the WAN port on
the rear panel.
5. Power: Plug the power cord into the power jack.
6. The device will boot up at this moment. Make sure the LED in front panel light up correctly.
3