Yoctopuce Yocto-Display, User Manual

Page: 23 / 424

Module list as displayed in your web bowser
5.3. Localization
You can then physically localize each of the displayed modules by clicking on the beacon button.
This puts the Yocto-led of the corresponding module in Yocto-beacon mode. It starts flashing, which
allows you to easily localize it. The second effect is to display a little blue circle on the screen. You
obtain the same behavior when pressing the Yocto-button of the module.
5.4. Test of the module
The first item to check is that your module is working well: click on the serial number corresponding
to your module. This displays a window summarizing the properties of your Yocto-Display.
Properties of the Yocto-Display module
This window allows you, among other things, to display an arbitrary text on the screen and to check
the state of the anButtons inputs.
5.5. Configuration
When, in the module list, you click on the configure button corresponding to your module, the
configuration window is displayed.
5. First steps
www.yoctopuce.com 17