YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
35
SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function. "
" icon is displayed on remote
controller. Press this button again to cancel sleep function and "
" icon will disappear.
TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature
on indoor unit’s display. The setting on remote controller is selected circularly as below:
When selecting "
" or no display with remote controller, temperature indicator on indoor unit displays set
temperature.
When selecting "
" with remote controller, temperature indicator on indoor unit displays indoor ambient
temperature.
When selecting "
" with remote controller, temperature indicator on indoor unit displays outdoor ambient
temperature.
Note:
Outdoor temperature display is not available for some models. At that time, indoor unit receives "
" signal,
while it displays indoor set temperature.
It’s defaulted to display set temperature when turning on the unit. There is no display in the remote controller.
Only for the models whose indoor unit has dual-8 display.
When selecting the display of indoor or outdoor ambient temperature, indoor temperature indicator displays
corresponding temperature and automatically returns to display set temperature after three or five seconds.
I FEEL button
Press this button to start I FEEL function and "
" will be displayed on the remote controller. After this function
is set, the remote controller will send the detected ambient temperature to the controller and the unit will
automatically adjust the indoor temperature according to the detected temperature. Press this button again to
close I FEEL function and "
" will disappear.
Please put the remote controller near user when this function is set. Do not put the remote controller near the
object of high temperature or low temperature in order to avoid detecting inaccurate ambient temperature.
LIGHT button
Press this button to turn off display light on indoor unit. "
" icon on remote controller disappears. Press this button
again to turn on display light. "
" icon is displayed.
CLOCK button
Press this button to set clock time. "
" icon on remote controller will blink. Press " " or " " button within 5s to set clock
time. Each pressing of " " or " " button, clock time will increase or decrease 1 minute. If hold " " or " " button, 2s later,
time will change quickly. Release this button when reaching your required time.
Note:
Clock time adopts 24-hour mode.
The interval between two operations cannot exceeds 5s. Otherwise, remote controller will quit setting status.
Operation for TIMER ON/TIMER OFF is the same.
