YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
34
FAN button
Pressing this button can set fan speed cycle: auto (AUTO), low (
), medium (
), high (
).
Auto
Note:
Under AUTO speed, air conditioner will select proper fan speed automatically according to factory settings.
Fan speed under dry mode is low speed.
SWING button
Press this button can select up & down swing angle. Fan blowing angle can be selected cycled through as below:
When selecting "
", the air conditioner is blowing fan automatically. The horizontal louver will automatically swing up &
down at maximum angle.
When selecting "
“, the air conditioner is blowing the fan at a fixed position. Horizontal
louver will stop at a fixed position.
When selecting "
“, the air conditioner is blowing the fan at a fixed position. Horizontal louver will
blow air at a fixed position.
Hold "
" button above 2s to set your required swing angle. When it reaches your desired angle, release the
button.
Note:
may not be available. When air conditioner receives this signal, the air conditioner will turn on the fan
automatically.
TURBO button
Under COOL or HEAT mode, press this button to turn for quick COOL or quick HEAT mode. "
" icon is displayed on
remote controller. Press this button again to exit turbo function and "
" icon will disappear.
/
button
Press "
" or "
" button once increase or decrease set temperature 1
℃
(1°F). Holding " " or " " button, 2s
later, set temperature on remote controller will change quickly. Release the button after finished adjusting the
setting, the temperature indicator on indoor unit will change accordingly. (Temperature canot be adjusted under
auto mode)
When setting TIMER ON, TIMER OFF or CLOCK, press " " or " " button to adjust time. (Refer to CLOCK,
TIMER ON, TIMER OFF buttons) When setting TIMER ON, TIMER OFF or CLOCK, press " " or " " button to
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons)
