YILMAZ ACK 700, User Manual

Page: 52 / 60

8. MAINTENANCE, SERVICE AND REPAIR 51
8.1 Maintenance
8.1.1
Cut the electric and pneumatic power connections of the machine.
8.1.2 Clean all surfaces of the machine from burs, chips and foreign substances. If the machine will not be used for a
long time, lubricate undyed parts with oil that prevents rusting.
8.1.3 When cleaning the machine, do not use materials that may damage the dye.
8.1.4 Control cutting tools against corrosion, distortion and fractions. If cutting tools are damaged, change them.
8.1.5 Before using cutting tool, operate the machine out of gear and control whether it is inserted correctly, it is
without flexure and it is inserted appropriately. Do not use cutting tools that are damaged or lost its functionality.
8.1.6 If the sawteeth are blunted, change a new / sharpened saw.
8.1.7 Sharpen with proper sharpening machines by taking the angular value of the saw into consideration.
8.2 Changing the Cutting Tool
8.2.1 Cut the electric connection of the machine.
8.2.2 The machine on the front panel ( FIGURE – 1 NO.8 ) as a complete open door unlocking. cover at the rear of
the machine open by removing the screws.
NOTE : Make sure not to damage the components inside the cabinet.