YILMAZ REDÜKTÖR E Series, Operating Instructions Manual

Page: 24 / 52

5 -Thinks to Check Before the Gear Unit or Geared Motor is Installed
If geared motors are used, please also refer to the manual of the motor manufacturer.
Before you install the gearbox you have to be sure that the gearbox is arrived with the all necessary
equipment and without damage. Points to take into consideration before you start to install the unit;
- You have received the correct operation manual of the your product.
- The gearbox and all its parts are transported without damage.
- The gearbox is stored correctly according the instructions in this manual
-You have the latest product catalogue or you have access to our web page
5.1- Transportation
When the goods arrive, first check for any damage. If some damage observed, immediately contact
the transport company and inform about the damage. Contact YILMAZ for the damage and do not
start to install the unit until it is agreed that the damage has no affect of operation.
Use the supplied eyebolts or lifting holes for lifting up the gear unit. The eyebolts are capable to
carry the weight of gearboxes only. Do not hang additional loads. Use suitable hoisting equipment
which is capable to hold the gear units weight. Refer to the catalogue for various types weights. See
drawing bellow for hoisting point.
Do not stay beneath / under the lifting/hoisting equipment which may cause serious injuries by falling
down objects, accidental movements, unexpected accidents.
Falling or hard placement can damage the gear unit.
Only use hoisting and securing equipment which is permitted for the size / weight of your gear unit.
Ensure that the load is slowly and carefully handled and placed.
Safety
24
Operating Instructions
E Series