www.yictechnologies.com
Cables & Component Checklist
Components Supplied with the EMScanner System
1
Scanner board
EMScanner
2
Adapter
The adapter controls the
EMScanner
3
RF SMA to type
N coaxial cable
It is referred as the RF cable in this
manual. It connects the scanner to the
spectrum analyser and has a SMA
connector for the scanner and a N
connector for the spectrum analyzer 50
ohm input port. It transmits RF output of
the scanner to the spectrum analyser.
4
Micro-D control
cable
It connects the adapter to the scanner to
enable control of the scanner’s switched
probes and to power the scanner.
5
USB Cable
It connects the PC (laptop or desktop) to
the adaptor. The USB Cable provided with
the system has ferrites on both ends of the
cable
6
SMB-BNC
Trigger Cable
It connects the adaptor to the spectrum
analyser
