Basics
4
1.4.3 Sleep mode
Sleep mode suspends your GPS-PAD to a low power state while the display is off in order to save
battery power. You will still be able to receive messages and calls while the GPS-PAD is in Sleep
mode.
[Note]: If the GPS-PAD in sleep mode more than 30 minutes, the device will automatically turn
off to save electricity.
[Tip]: For information on how to adjust the time before the screen turns off, see “Adjusting the
time before the screen turns off” in the Settings chapter.
Switching to Sleep mode
Briefly press the Power button to turn off the display temporarily and switch your GPS-PAD to
Sleep mode. Your GPS-PAD also automatically goes into Sleep mode when you leave the
GPS-PAD idle after a certain period of time. Switching to Sleep mode also prevents accidental
button or touch screen presses when the GPS-PAD is in your bag or pocket.
Waking up from Sleep mode
To wake up your GPS-PAD manually, press the POWER button. You will then see that the
GPS-PAD has locked the screen. To find out how to unlock the screen, see “Unlocking the screen”
below.
1.4.4 Unlocking the screen
Press the bar on the lock screen and then slide your finger upwards to unlock the screen.
If you have set up a screen unlock pattern, you will be prompted to draw the pattern on the screen
before it unlocks.
1.5 Home screen
When you sign in, the Home screen opens.
The Home screen is your starting point to access all the features on you GPS-PAD. It displays
Summary of Contents for GPS-PAD PI 08
Page 1: ...1 User Guide to GPS PAD PI 08 YF Technology...
Page 65: ...61...
