Basics
2
1.3 Before turning on
1.3.1 Storage card
Store pictures, music, and applications by inserting the TF Flash card into your GPS-PAD.
Inserting the storage card
The storage card slot is on the in left panel, just insert the TF Flash card with its gold contacts
facing down and push it in until it licks into place.
Removing the storage card
Simply push the storage card in to eject it from its slot.
1.3.2 Battery
The GPS-PAD comes with a built-in polymer rechargeable battery and is designed to use only
manufacture-specified original batteries and accessories. Battery performance depends on many
factors, including network configuration, signal strength, the temperature of the environment in
which you operate the GPS-PAD, the features and/or settings you select and use, items attached to
connecting ports, and the voice, data, and other program usage patterns.
Charging the battery
The battery is partially charged when shipped. Before turning on and start using the GPS-PAD, it
is recommended that you charge the battery. Some batteries perform best after several full
charge/discharge circles.
1.
Attach the power plug to the AC adapter.
2.
Connect one end of the USB cable to the USB port on the GPS-PAD.
3.
Connect the other end of the USB cable to the USB port of the AC adapter.
4.
Plug in the AC adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED (located on the left side of the front panel)
shows a solid red light. When the GPS-PAD is fully charged, the light turns green.
When you charge the battery while the GPS-PAD is on, the charging battery icon (
) is
displayed in the status bar of the home screen. After the battery has been fully charged, a full
battery icon (
) will be displayed in the status bar of the home screen.
[Attention]:
Summary of Contents for GPS-PAD PI 08
Page 1: ...1 User Guide to GPS PAD PI 08 YF Technology...
Page 65: ...61...
