4
TABLE OF CONTENTS
FOREWORD…………………………………………………………….2
SAFETY……………………………………………………………….…3
TABLE OF CONTENTS/BOLT TORQUE..
…………………………..4
GENERAL INFORMATION.......................................................5
– 6
ASSEM
BLY INSTRUCTIONS…………………………………..7 – 11
O
PERATION…………………………………………………….12 – 13
MAINTENANCE………………………………………………...14 – 16
PARTS IDENT
IFICATION……………………………………..17 – 33
TR
OUBLESHOOTING…………………………………………….....34
NOTES...........................................................................................35
BOLT TORQUE
READ THESE INSTRUCTIONS FIRST:
1. Improperly tightened bolts will result in damage, breakage, expense, and down time.
2. Always replace bolts with the specified grade and type.
3. Torque properly before first use of the machine and every 2-4 hours of use until you are sure bolts are staying tight.
4. The chart below is a guide for proper torque. Use it unless a specified torque is called out elsewhere in the manual.
5. Torque is the force you apply to the wrench handle or the cheater bar, times the length of the handle or bar.
6. Use a torque wrench whenever possible.
The following table shows torque in ft. lbs.
TOOLS REQUIRED
The basic tools required will be:
-
Electric or Pneumatic Impact Driver
-
10” Impact Extension
-
15/16 & 1 1/8 Socket
-
Torque Wrench
Additional tools may be needed
depending on application.
