Yetter Furrow Max 6200-070, Owner'S Manual, Page: 7 / 36

7
INSTALLATION INSTRUCTIONS
John Deere7200/7300/1700
6200-080 V-Closing wheel kit
STEP 1:
Remove the closing wheel arm, spring and pivot bolts. Then take off the cast block bolted to the row unit.
Save the two 12MM bolts holding it on.
STEP 2:
Using the two 12MM bolts, attach the furrow max unit to the row unit. Ensure that the closing system is
straight with the row unit and torque the bolts to 92 ft/lbs.
STEP 3:
Use the ½” x 3.75” pin, washers, and cotter pin to attach the spring to the disc pivot bracket. Use the
shoulder bolt and locknut to attach the cast closing disc arm to the main body. Use the 3/8” x 1.25” pin and
cotter pin to attach the spring to the cast arm in the 3
rd
hole.
Attach the stock cast closing arm mount block with the two ½” x 1.5” bolts and locknuts. Reassemble the
closing wheel arm, spring, handle and closing wheels.