Yetter Furrow Max 6200-070, Owner'S Manual, Page: 12 / 36

12
INSTALLATION INSTRUCTIONS
Kinze 4900 6200-073
STEP 1:
Remove the closing wheel arm, spring and pivot bolts.
STEP 2:
Install the Furrow max sub assembly by first putting the ½” carriage bolts through the old pivot bolt holes.
Next put the 7/16” bolt through the lower hole where the old down pressure spring attached. Tighten the
carriage bolts and the 7/16” bolt. Next adjust the ¾” bolt out to the point that is has a light amount of
tension on the back of the row unit, and then tighten the jam nut.