Yetter 5000 SERIES, Owner'S Manual

Page: 10 / 24

10
ASSEMBLY INSTRUCTIONS
Step 1 : Attach each 5000-169 torsion pivot to each torsion mount & center pivot using 5/8” X 2” bolts & 5/8 lock hex nuts.
Step 2:
Install the 5000-277 & 5000-298 (16 row only) Torsion Mount & the 5000-5000-278 Center Pivot. The Torsion Mounts will
each use 2) 5000-438 Backing Plates & 2) 5000-439 Short Backing Plates. The Center Pivot will use 2) Backing Plates & 2) Short
Backing Plates on the outer edges & 1) 5000-440 Center Backing Plate & 1) 5000-441 Short/Double Backing Plate on the center
of the mount. Fasten the Torsion Mount & Center Pivot assemblies to the Backing Plates using 3/8 X 1 ½” carriage bolts & 3/8 hex
flange lock nuts.
6 Row Head – 5000-277 under row 2 & row 5, center pivot under rows 3 & 4. (model provided below)
8 Row Head – 5000-277 between rows 1 & 2 and 7 & 8, under rows 3 & 6, center pivot under rows 4 & 5.
12 Row Head – 5000-277 under rows 1, 2, 5, 8, 11, & 12, center pivot under rows 6 & 7.
16 Row Head – 5000-277 under rows 1, 4, 6, 7, 10, 11, 13, & 16, 5000-298 under rows 2 & 15, center pivot under rows 8 & 9.
NOTE: Removing the original resting pads may be required.