Yetter 2967-180B, Operator'S / Instruction Manual W/ Parts Identification

Page: 7 / 16

ASSEMBLY INSTRUCTIONS
STEP 2. Attach the 2959-206 R.M. arm to the coulter arm using the
5/8” x 9” bolt, 4) 5/8”
flat washers, 2) pivot bushings (2967-
553) and 5/8” lock hex nut.
STEP 3.
Insert the adjustment pin into the arm and the Adjustment Plate. Check the
alignment of all the adjustment holes, move adjustment plate as needed then securely
tighten the 5/8” spindle bolt and the 3/8” x 1 ½” bolt. Install the adjustment pin and secure
with 1/8” hairpin clip.