3mm deep slot
A. Draw around your servos and cut to the correct depth, make “criss cross” patterns
and lever out the foam carefully with a screwdriver, checking for fit as you go.
B. Insert the servos, they should sit flush with the top of the wing, cut a shallow (3mm)
deep channel from the servo cable exit to the radio bay.
Also check that your chosen receiver fits with the servo plugs in.
Now remove all servos and receiver
A.
B.
Summary of Contents for ELECTRIC WING 46"
Page 9: ...CENTRE OF GRAVITY 200MM ...
Page 12: ......
