Attach Wingtips with filament tape, thread 5” of filament tape through the
pre-cut slots and tape to top and bottom of wing tip. Secure the front with
another piece.
Optional, Make some EPP hatches out of the sheet supplied, you can
hinge the battery bay with some strapping tape
Applying the vinyl graphics: Last job to be done
Step1: Carefully peel the white paper away from the backing paper (the
sticky paper that resembles masking tape) leaving the vinyl graphic on
the backing paper. If any part refuses to stick to the backing paper, press
it down between your fingers until it does.
Step2: Align the backing paper with vinyl onto the model where you wish
to apply it, rub it down firmly and peel back the backing paper to reveal
the graphic
Summary of Contents for ELECTRIC WING 46"
Page 9: ...CENTRE OF GRAVITY 200MM ...
Page 12: ......
