Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
4
CNC
STYLUS
–
QUICK
START
GUIDE
V1.1
1
Introduction
Thank you for purchasing CNC Stylus. This quick start guide has been created to enable
you to start drawing and cutting vinyl as quickly as possible.
For more detailed guidance,
please see Section 8.2 Knowledgebase, page 17.
2
Getting Started
Before you start, we would recommend reading this guide to ensure you understand how
to successfully use the CNC Stylus.
2.1
Safety
Note:
Vinyl cutting blades are sharp and should be handled with care. When
not in use, remove the blade and replace the cover. Blades should be
disposed of in a safe manner.
2.2
What
’
s in the box?
Start by getting familiar with all the components of the CNC Stylus.
Please check the box contents. If any of the above items are damaged or missing, please
contact your point of purchase immediately.
1x CNC Stylus
1x ER25 Collet set (sizes 8-16mm)
1x Vinyl cartridge
3x Set of vinyl cutting blades (30, 45 and 60 degree)
1x Set of 4 Sharpies (Marker pens)
1x Blade height jig
Summary of Contents for CNC Stylus
Page 1: ......
