Yeti Tool Ltd | Unit 12 Old Mill Road | Portishead | Bristol | BS20 7BX
13
CNC
STYLUS
–
QUICK
START
GUIDE
V1.1
7.2.3
Work-holding
There are several different ways to hold material down to your spoil board. We would
recommend using either a low tack tape or a spray mount adhesive. You should ensure
your material is as flat as possible.
To find out more about work-holding, please see
Section 8.2 Knowledgebase, page 17.
7.3
Blade types
There are 3 different types of blade, defined by their cutting angle. The different angles
can be applied to different material types and thicknesses. The diagram below represents
the 3 different blade angles and their uses.
60 degree
–
Thick media such as card, rigid vinyl, fabric, cork, and magnet
45 degree
–
Medium media such as vinyl (adhesive and heat transfer), paper and thin card
30 degree
–
Thin media such as film or window tint
*Cutting mat/ backing paper
Summary of Contents for CNC Stylus
Page 1: ......
