Intellimix Web Manual Control Unit
Figure 1: Control Unit 52-1190
Purpose of this Guide
This guide describes the Control Unit (type number 52-1190 Control Unit, short CTRL-Unit) and all the
Intellimix Control Unit’s settings.
As the options given by so
ft
ware extensions may change in the future,
we base this guide on the firmware version “intelli-8.1.11.00”.
You can check the versioning the main menu Admin/System/System
Info: FW 5.5.11.0. More on that later.
The so
ft
ware internally consists of multiple components. In detail:
The Base Unit Firmware (e.g. version 8.1.38), the Control Unit
Firmware (e.g. version 5.5.11.0) which also includes the PCB version,
the FPGA version and the G-Touch© Fader Firmware version. But
don’t worry too much about all the di
ff
erent versions.
The important file is named e.g. “intelli-8.1.11.0.fw8 which is the complete package:
REMARK:
The Intellimix2 So
ft
ware consists of one file. Download the respective current version here:
http://www.yellowtec.com/intellimix/downloads.html
While upgrading, the di
ff
erent firmware parts are automatically transferred to the memory areas of the
whole system. See also the section “Firmware Update” of the Intellimix Wizard Manual.
PLEASE NOTE: Safety instructions should be followed at all times!
2
Summary of Contents for intellimix
Page 1: ......