manualshive.com logo in svg

Yellowtec intellimix, Manual, Page: 17 / 32

Share
Download
Yellowtec intellimix Manual Download Page 17

8-Channel Option 

Requirements

From Intellimix Firmware 8.1.11 an integrated 8-channel option is available. Use it to simultaneously 
mix up to eight channels with the use of the Intellimix interface. 

To be able to use this function it is necessary to adjust the configuration “number of faders” to 
“8Faders” (hardware side) within the Intellimix wizard.

8 Sources in 2 Layers

By pressing the rotary control you can switch between the display of source 1-4 and 5-8 within the 
Master Display Section. It is also possible to connect two Intellimix Control Units to one single 
Intellimix Base Unit to be able to simultaneously adjust all eight channels by letting one Base Unit 
display channel 1-4 and the other one channel 5-8. 

Master Display while 8-channel operation and signals: 

 

 

 

 

  

ON: At least one channel is turned on and the fader is opened 

  

MIC: At least one microphone one is turned on and is opened 

  

CUE: At least one channel is in pre-listening mode 

  

TEL: Reacts to the logic trigger “Status Ringing Any” (see  

             

  

          wizard I/O settings 

  

1234 5678: Show the overlying source assignment (channel 1-4 

  

 

      or channel 5-8)




  

 

 

 

 

  

REMARK: 

1234 5678 is only displayed within the  8-channel  




  

 

    configuration.

 

 

 17

Summary of Contents for intellimix

































Reviews:

No comments