Yellowtec intellimix, Manual, Page: 12 / 32

b-line Telephon Hybrid Control
Requirements
From Intellimix Firmware 8.1.10 an integrated Yellowtec b-line Telephone Hybrid control is
available. Use it to operate up to two b-lines with the use of the Intellimix interface.
To be able to use this function it is necessary to load Intellimix with a configuration file (*.yim) with a
wizard from version 8.1.24. A
ft er doing so, you have access to full control over b-line via LAN interface.
To make use of it, please also read the description of the wizard as well as the b-line manual to learn
about the configurations which have to be set.
Assignment of Control
The b-line control has to be assigned to the Intellimix Control Unit within the channel menu.
Therefore, the audio source (e.g. Digital1) which is connected to a b-line device is placed on one of the
four channels. By SWIPING UP over the display frame from below you open the menu. Scroll down to
the menu item “Options” and select it by touching it.
This selection menu appears:
Via touch you can select either “Line1” or “Line2” to be assigned to control the audio source (e.g.
Digital1).
Only one of both controls can be assigned to a source simultaneously. In case the control had been
assigned to another source previously, it is being assigned otherwise now.
If you wish to undo an assignment, simply select the checked option again.
Leave the channel menu by touching the HOME button.
12