yellow Gardenline YGL N.G. 4000, Translation From Original Manual

Page: 17 / 32

17
Fitting the table, Fig. 6
The table can be fitted at three heights (59, 82,5 and
105 cm) suiting the length of the logs. There are locking
hooks at every position.
Insert the log table (A) through the brackets (1) and let it
click into place.
Secure the table with the toggle screw (2).
Working hints
Stroke limit for short logs, Fig. 7
Lower splitting knife position about 10 cm above table.
• Move splitting knife to the desired position
• Release one operating arm
• Switch motor off
• Release the second operating arm
• Release the locking screw
• Push the stroke set rod to the top until it is stopped by
the spring
• Retighten the locking screw
• Switch motor on
• Check upper position
Functional test
Test the function before every use.
Action: Result:
Push both handles towards below. Splitting knife goes
down to above the table.
Let one handle loose, then the
other. Splitting knife stops in
the desired position.
Let both handles loose. Splitting knife returns to
upper position.
Check the oil level before every use – see chapter
“Maintenance“.
Splitting
• Place the log on the table, hold it with both handles,
press the handles down. As soon as the splitting knife
enters the wood, push the handles down and to the
outside at the same time. This prevents the wood from
putting pressure on the holder plates.
• Only split straight cut logs.
• Split the logs in vertical position.
• Never split in horizontal position or across.
• Wear protective gloves when splitting.