background image

18

EN

In order to better preserve your device’s battery, here are some reminders and 
instructions for use:

• Do not unplug the charger before the battery is fully charged. 
• Store the product containing the battery in a cool place (temperature > 0°C), 
preferably around 15°C. Be careful, as excessive heat will also damage the battery.
• Avoid deep discharges. 
• Avoid recharging the battery right after use. Allow the device to rest for between 

15 minutes and 1 hour after use before charging.

• Avoid overcharging. Do not leave the charger plugged in for more than 24 hours, as 
it will heat up needlessly.

Notice: 

We recommend recharging the battery, if not in use, after each use and at 

least once a month.

Important:

 If you are not near a charging point when the battery is down to its last 

quarter, we recommend switching to eco mode.

Tip:

 As you drive, the battery level indicator on the display may suddenly decrease 

depending on your driving style and conditions (heavy use of the accelerator, riding 
uphill, outside temperature below 10°C, etc.). Be aware that the actual battery level 
displayed will be most accurate when the device is turned off.

4.2. INSPECTING AND MAINTAINING YOUR DEVICE

Your product requires routine inspection and maintenance.

This chapter describes maintenance and operation steps.
Before performing the following operations, make sure that the power is off and that 
the charging cable is unplugged.

MAINTENANCE AND SPARE PARTS:

Your device requires regular maintenance for your safety but also to increase its life 

span. Mechanical components should be checked periodically to ensure that worn or 
worn-out parts are replaced if necessary.
The battery must be removed before each maintenance operation.

CAUTION:

 

When replacing components, original parts must be used in order to 

maintain the performance and reliability of the device. Only the manufacturer’s parts 
are considered original. 

CAUTION:

 The user is solely responsible for the purchase and use of counterfeit parts, 

which may result in damage to the product, the user or the environment.
Make sure to use appropriate spare parts for the wheels, drivetrain components and 
the various components of the braking system. If you have any questions, please 
contact the after-sales service.
The manufacturer cannot be held responsible for improper use or incorrect assembly.

Summary of Contents for 100c signature





















Reviews: