YEAZ HIGHLIGHT Pro, User Manual

Page: 7 / 23

6
Light Modes
Pressing the power button multiple times changes the light mode:
1. Press the button once to turn on the main headlight at full brightness.
2. Press a second time to set the brightness to medium - only the two outer lamps light up.
3. Press a third time to turn on all three lamps at full brightness.
4. Press a fourth time to set the lamp to blink.
5. Press a fifth time to turn off the headlamp.
Changing the head angle
The headlamp has two positions: forward and down. In order to switch between the two positions
simply move the head of the lamp in the desired direction.
Attention!
•
Remove the batteries when the lamp is not in use.
•
Do not open the housing, as this will void the warranty.
•
Only use the original charger for charging the batteries. Using another charger can affect the
batteries’ operation and lifespan.
•
Avoid looking directly into the headlamp’s light .
•
Keep away from fire and extreme heat.
•
Avoid leaving the headlamp in wet conditions.
•
Do not operate the headlamp while it is connected to the charger, as it might become
damaged.
•
Return used batteries to designated collection points.
•
All users are obliged to dispose of all electrical and electronic equipment, whether or not it
contains toxic substances, at a municipal or commercial collection point, as it must be disposed
of
in an environmentally friendly manner.
Warranty
We provide a 24-month warranty to ensure the quality of our products. Damage caused by external
influences as well as negligent use void the warranty. If you have any problems with the product,
please contact our customer service by e-mail and we will answer you as soon as possible.
Email: support@vehnsgroup.com