S-Series IP PBX Administrator Guide
25
Name
: give this network drive a name to help you identify it.
Host/IP
: set the IP address where the recordings will be stored.
Share Name
: the shared folder name where the recordings will be stored.
Access User Name
: the User name used to log in the Network share. Leave this blank if it is not
required. In general, you use the administrator account on PC as a user name here.
Access Password
: the password used to log into the network share. Leave this blank if it is not
required.
5.
If the configuration is correct, you can see the NETDISK status shown as below.
Figure 3-14 Network Disk Status
Storage Locations
When the storage devices are configured and ready to use, you can select where to store CDR,
Recordings, Voicemail, one-touch recordings, logs.
Figure 3-15 Storage Locations
Auto Cleanup
Yeastar S-Series supports auto clean for CDR, logs, voicemails, one-touch recordings and
recordings.
Table 3-9 Auto Cleanup Settings
CDR Auto Cleanup
Max Number of CDR
Set the maximum number of CDR that should be retained. The
default is 100000. The old CDR will be deleted when the threshold
is reached.
CDR Preservation Duration
Set the maximum number of days that CDR should be retained.
The default is left blank.
Voicemail and One Touch Recording Auto Cleanup
Max Number of Files
Set the maximum number of voicemail and one touch recording
files that should be retained. The default is 50. The old CDR will be
deleted when the threshold is reached.
Files Preservation Duration
Set the maximum number of minutes that voicemails and one
touch recordings should be retained. The default is left blank.
Recordings Auto Cleanup
Max Usage of Device
Set the maximum storage percentage the device is allowed to
store. The default is 80%. The recordings will be deleted when the
