S-Series IP PBX Administrator Guide
16
.Firewall Rules
Users could add rules to accept or reject traffic through the system. Go to
Settings
>
System
>
Security
>
Firewall Rules
to configure firewall for the system.
Before adding firewall rules, please check the option
Enable Firewall
, then click
Save
to enable the
firewall.
Figure 3-2 Firewall Rules
Click
to add a new rule.
Click
to edit the rule.
Click
to delete the rule.
Check the firewall configuration parameters below.
Table 3-5 Firewall Configuration Parameters Description
Firewall
Enable Firewall
Enable Firewall to protect the system from malicious attack. Click Save icon
to apply the changes.
Disable Ping
Enable this item, net ping from remote hosts will be dropped. Click Save
icon to apply the changes.
Drop All
When you enable Drop All feature, the system will drop all packets and
connections from other hosts if there are no other rules defined. To avoid
locking the device, at least one TCP Accept common rule must be created
for port used for SSH access and port used for HTTP access.
Firewall Rules
Name
Specify a name to identify the firewall rule.
Description
Description for this firewall rule.
Action
Select the action for the firewall rule:
Accept
Ignore
Reject
Protocol
Select the protocol applied for the rule:
UDP
TCP
BOTH
Source IP address/
Subnet mask
The IP address for this rule.
