Yeastar Technology NeoGate TA410 User Manual Download Page 46

Page: 46 / 55

TA410/810 User Manual

or “Invite” packets, TA410/81 always respond the

packets using “SIP404 NOT FOUND”.It’s

recommended that it is enabled for security

reason.

Session-timers

Enable session-timer mode, default: yes. If you

find the call is cut off every 15 minutes every

time, please disable this.

Session-expires

The max refresh interval

Session-minse

The min refresh interval, which mustn't be

shorterthan 90s.

Session-refresher

Choose the session-refresher, the default is Uas.

4.2.4 IAX Settings

IAX is the Internal Asterisk Exchange protocol, you can connect to TA410/810 or

Figure 4-13 IAX Settings

Table 4-10 Description of IAX Settings

Items

Description

Bind Port

Port used for IAX2 registrations. The default is 4569.

Bandwidth

Low/medium/high with this option you can control which

codec to be used.

Min Registration Time

Minimum duration (in seconds) of an IAX2 registration.

Default is 60 seconds

Max Registration Time

Maximum duration (in seconds) of an IAX2 registration.

Default is 1200 seconds.

Codecs

Enable the codec you want for IAX communication.

46/55

Summary of Contents for NeoGate TA410
























































Search results

Summary of Contents for NeoGate TA410

Reviews:

Related manuals for NeoGate TA410

Brands by name

Popular brands

Yeastar Technology NeoGate TA410, User Manual

Search results

Summary of Contents for NeoGate TA410

Reviews:

Related manuals for NeoGate TA410

Brands by name

Popular brands